Metal Bed with Upholstered Headboard
Metal bed frame with an upholstered headboard and clearly defined tube specifications. The current quotation uses 1.0 mm tube for the main structural areas and main legs, 0.8 mm tube for the middle supporting legs, with size-specific CBM, 40HQ loading and FOB references for procurement planning.
Share your target size, finish, order quantity and destination market. We will confirm the quotation basis before pricing.
check what affects delivery.
Size and structure, carton dimensions, MOQ by variant, loading estimates and documents for your destination market.
What this model offers.
Review the construction and practical features of this exact model before comparing alternatives.
1.0 mm main structural tubes
The main headboard tube, footboard tube, side rails and main legs use the quoted 1.0 mm wall thickness.
Defined 0.8 mm middle support tube
The middle supporting legs are specified separately at 0.8 mm rather than being described as 1.0 mm throughout.
Upholstered tubular headboard
The 110 cm quoted headboard uses sponge covered by fabric over the metal tube structure.
Defined slat and centre-support layout
The bed base uses 53 × 12 mm straight wooden slats in 12 rows with a middle cross rail and three supporting legs.
Two-carton export packing
Each set is packed in two cartons with approximately 10 mm foam protection around the four sides.
Size-specific loading and FOB references
Three quoted sizes include CBM, 40HQ loading references and FOB prices for procurement planning.
Construction and specifications.
Use the confirmed construction as your comparison baseline. Changes may affect cost, packing and production.
- Product type
- Metal bed with upholstered headboard.
- Main headboard tube
- Ø25 × 1.0 mm.
- Footboard main tube
- Ø25 × 1.0 mm.
- Side rails
- 20 × 70 × 1.0 mm.
- Main legs
- 1.0 mm tube.
- Middle supporting legs
- 0.8 mm tube.
- Headboard height
- 110 cm current quoted specification.
- Footboard height
- 46 cm.
- Headboard construction
- Sponge covered by fabric over a tubular metal frame.
- Bed slats
- 53 × 12 mm straight wooden slats, 12 rows.
- Middle cross rail
- 3 supporting legs.
- Packing
- 2 cartons per set.
- Foam protection
- Approximately 10 mm thick foam around four sides.
Additional specificationProduct type: Metal bed with upholstered headboard.
Main headboard tube: Ø25 × 1.0 mm.
Footboard main tube: Ø25 × 1.0 mm.
Side rails: 20 × 70 × 1.0 mm.
Main legs: 1.0 mm tube.
Middle supporting legs: 0.8 mm tube.
Headboard height: 110 cm current quoted specification.
Footboard height: 46 cm.
Headboard construction: sponge covered by fabric over a tubular metal frame.
Bed slats: straight wooden slats, 53 × 12 mm, 12 rows.
Middle cross rail: 3 supporting legs.
Packing: 2 cartons per set.
Protection: approximately 10 mm thick foam around four sides.
Size/FOB references: 1370 × 1910 mm — $46.70 FOB; 1500 × 2000 mm — $49.20 FOB; 1800 × 2000 mm — $55.60 FOB.
1800 × 2000 mm loading reference: 0.116 CBM/set; 584 sets/40HQ.
Current quotation does not provide product-specific weight, package dimensions, MOQ, production lead time or certification evidence; these items should be confirmed before order.
Sizes and container planning.
Compare variants using carton count, CBM and estimated loading quantities recorded for each size. Final figures require a packing review.
| Size | Market | Overall dimensions | Cartons | Carton dimensions | CBM | 20GP (est.) | 40HQ (est.) |
|---|---|---|---|---|---|---|---|
| 1370 × 1910 mm | Quoted size | 2 | 0.094 | 722 | |||
| 1500 × 2000 mm | Quoted size | 2 | 0.102 | 669 | |||
| 1800 × 2000 mm | Quoted size | 2 | 0.116 | 584 |
What can be configured.
Fabric, colour, structure and packing choices depend on the model. Non-standard changes need feasibility and production review.
Configurable areas
Size, upholstery fabric/colour, metal finish/colour, headboard dimensions and packing can be reviewed subject to production and cost confirmation. Do not treat non-standard changes as standard configuration.
A different headboard height, including a project-specific height such as 146 cm, should be reviewed before sampling. Any change to tube thickness, structure, packing or customer drawings requires feasibility and price confirmation.
Order review
- Packing method
- 2 cartons per set. Four sides protected with approximately 10 mm thick foam.
- Mixed container
- Case By Case
- Sample
- Available
Documents to review.
Request the documents relevant to your selected construction and destination. A general test claim is not proof for every variant.
Compliance notes
No product-specific certification evidence was provided with the source data for this model. Confirm the required structural, safety and fire-safety scope for the destination market before making a compliance claim.
Market-specific checks.
These notes are recorded for this product. Ask for the documents that apply to your exact specification.
Questions before ordering.
Answers specific to this product and its purchasing conditions.
Which metal components use the quoted 1.0 mm tube thickness?
The main headboard tube, footboard tube, side rails and main legs use the quoted 1.0 mm specification. The middle supporting legs use 0.8 mm tube.
What is the current headboard height?
The current quoted headboard height is 110 cm. A different height should be reviewed before sampling and may require a revised specification and price.
What is the FOB price for 1800 × 2000 mm?
The current quotation is USD 55.60 FOB per set for 1800 × 2000 mm. The loading reference is 0.116 CBM/set and 584 sets per 40HQ.
How is the bed packed?
Each set is packed in 2 cartons. The four sides are protected with approximately 10 mm thick foam.
Can I check a sample before bulk production?
Sample availability is marked available for this product record. Key specification points such as tube thickness, dimensions, headboard height and packing should be confirmed before bulk production.
Can the tube specification or headboard height be changed?
Non-standard changes can be reviewed before sampling. Any change to tube thickness, headboard dimensions or structure should be confirmed for feasibility, revised cost and final specification.
Tell us what you need to order.
Send your target size, fabric or firmness, expected quantity, packing requirements and destination. We will check the specification and loading basis before quoting.
Useful details to include
Model and size
Fabric, colour or construction
Order quantity and packing preference
Destination market and compliance needs