Bed Frame Sourcing
Explore 39 published bed frame models for your next wholesale or retail sourcing programme. Review designs, available configurations, MOQ and packing before selecting products for quotation.
Product catalogue
Review published models and their recorded specifications. Where no standard model is listed, use the development enquiry route rather than an empty product shortlist.
UF-Metal-Bed
Metal bed frame with an upholstered headboard and clearly defined tube specifications. The current quotation uses 1.0 mm tube for the main structural areas and main legs, 0.8 mm tube for the middle supporting legs, with size-specific CBM, 40HQ loading and FOB references for procurement planning.
LO-03
A curved upholstered headboard with a gas-lift storage base for retail and import programmes. The reference model uses 14 rows of straight wood slats and ships in two cartons, with size-specific CBM and 40HQ loading data for order planning.
LB-151
[PRODUCT POSITIONING] This premium bouclé gas-lift storage bed frame is specifically engineered for online furniture retailers and cross-border B2B importers. [LOGISTICS ADVANTAGE] Optimized into a 100% knock-down (KD) flat-pack design packed across 2 mail-order cartons to significantly reduce shipping CBM, save destination warehouse footprint, and prevent last-mile transit damage.
P-101
A storage upholstered bed built around a 1610 mm panel headboard, 15 rows of curved wood slats and 50 mm wooden legs. Three mattress sizes are available with size-specific CBM and 40HQ loading references.
P-100
A non-storage upholstered bed with a rounded wing headboard, multi-layer board frame and 13 rows of straight wood slats. Three mattress sizes are available in a two-carton format with size-specific loading references.
DW-03
A gas-lift storage bed with a channelled 130 cm headboard and 50 mm electroplated legs for decorative retail ranges. The reference build uses 15 rows of wood slats, one centre bar and two support legs.
LB-50
A gas-lift storage bed with an 85 cm twin-cushion headboard, curved side rails and a curved footboard. The reference build uses 13 rows of curved wood slats and an export packing specification with foam protection.
LD-02
A gas-lift storage bed with a 125 cm scalloped wing headboard, 12 rows of wood slats and a centre support bar. Two mattress sizes are available in a two-carton format with size-specific loading references.
LT-149
A gas-lift storage bed with a 118 cm scalloped upholstered headboard, 12 rows of straight wood slats and a black non-woven storage lining. Three mattress sizes are available with size-specific loading references.
LB-200
A gas-lift storage bed with a 140 cm extra-wide headboard and mirror accents on both sides. The reference build uses 12 rows of curved wood slats and ships in three cartons.
LT232
A non-storage upholstered bed with a 105 cm vertical-channel headboard and a folding base designed to pack behind the headboard. Two mattress sizes are available with size-specific loading references.
LT2603
A non-storage upholstered bed with a 170 mm-thick pillow-panel headboard and a folding base designed to pack behind the headboard. Two mattress sizes are available with size-specific loading references.
LB-04
A non-storage upholstered bed with a 122 cm block-panel winged headboard and a folding base designed to pack behind the headboard. Two mattress sizes are available in a two-carton format.
UF-13
A non-storage upholstered bed with a 122 cm arched-channel headboard and a folding base designed to pack behind the headboard. Two mattress sizes are available in a two-carton format.
SA-01
For retailers who want a softer low-profile storage-bed SKU, the rounded silhouette keeps the design visually compact while gas-lift storage adds practical function.
VER-02
A gas-lift storage bed with a 120 cm upholstered headboard, 12 rows of curved wood slats and a 12 mm MDF storage bottom. Three mattress sizes are available in a two-carton format.
LO-29
A gas-lift storage bed with a 100 cm ribbed-channel headboard, 12 curved wood slats and a centre support bar. Two mattress sizes are available in a two-carton format.
LO-28
A gas-lift storage bed with LED lighting in both the headboard and footboard, a folding lift-up base and 12 rows of sprung wood slats. Two mattress sizes are available with size-specific loading references.
LO-01
Add a deeper-channel upholstered storage bed to your assortment with gas-lift function and a defined slat/base structure.
LO-04
For buyers who prefer a cleaner upholstered look, this slim-panel storage bed combines a restrained headboard profile with practical storage function.
Model-specific commercial information
Illustrative published models only. MOQ, lead time and packing belong to the named model, not the whole category. Check size and configuration before ordering.
| Model | MOQ | Lead time | Packing |
|---|---|---|---|
| Metal Bed with Upholstered HeadboardUF-Metal-Bed | To be confirmed according to size, colour and final… | To be confirmed according to order quantity and final… | 2 cartons per set. Four sides protected with approximately 10 mm thick… |
| Curved Double-Cushion Gas Lift Storage BedLO-03 | 50 Sets | 30 Days Standard · 45 Days Custom | 2 Cartons / Set |
| Rounded-Channel Gas Lift Storage BedLB-151 | 50 Sets | 30 Days Standard · 45 Days Custom | Export Cartons |
| Extra-Tall Panel Upholstered Bed FrameP-101 | 50 Sets | 30 Days Standard · 45 Days Custom | Export Cartons |
| Rounded Wing Upholstered Bed FrameP-100 | 50 Sets | 30 Days Standard · 45 Days Custom | 2 Cartons / Set |
| Gold-Accent Channel Gas Lift Storage BedDW-03 | 50 Sets | 30 Days Standard · 45 Days Custom | Export Cartons |
Before you order
Use these checks to prepare a model-specific brief. Values and compatibility must be confirmed against the selected product.
Confirm the frame construction, mattress size compatibility, support layout and finished dimensions for each model.
Review the actual frame materials, support components, legs, slat system and available configuration records.
Compare carton count, carton dimensions, CBM and model-specific 40HQ loading data where supplied.
Confirm MOQ by model, size and colour, production lead time, sample scope and mixed-container conditions.
A standard model, a configurable option and a structural development request are different supply scopes. We review non-standard changes for feasibility before quotation.
Product questions
Category-level guidance only. Model-specific prices, specifications and availability are shown on the relevant product pages.
No. MOQ can vary by product, size, colour and final configuration. Check the selected model and confirm the intended order mix.
Mixed-container planning can be reviewed against model-specific MOQ, carton dimensions and available loading space. The final assortment must be confirmed before quotation.
No. Available fabrics, support systems, storage options and other configurations depend on the selected model and require technical confirmation.
Review the specifications and packing information on each product page. For a destination market, confirm the required tests and documentation for the selected construction and materials.
Discuss your sourcing brief
Share your target market, preferred models, required sizes, configuration and estimated quantities. We can review specifications, MOQ, packing and loading requirements against your brief.
